Skip to main content

Configure the server

Scope​

This page describes the server configuration parameters, stored in the MapCore™ Map Layer Server configuration files. Refer to the following details for detailed information:

Table 3-1 Configuration parameters reference table

Configuration FileDescriptionConfigure parameters
Server configuration file McMapLayersServerConfig.xmlRefer to Server Configuration FileRefer to Server Parameters
Layer configuration file McLayersDataConfig.xmlLayer Configuration FileRefer to User-specific Layer Parameters

This page is intended for administrators who are authorized to install and configure the MapCore™ Map Layer Server.

warning

Only qualified personnel should change the server parameters as unreasonable changes in these parameters can result in unrecoverable error of the server.

note

Changes to MapLayersConfig parameters will take effect only after the next server reboot.

Server Parameters​

Configurable server parameters are stored in the server configuration file McMapLayersServerConfig.xml. Refer to Server Configuration File for more details. The ServerConfig.xsdscheme governing this file is described below. Throughout this page, where parameters are used in the GUI interface of the MapCore™ Map Layer Server, links are provided to respective location in the current document.

Figure 3-1

Figure 3-1 MapLayersConfig scheme

Where:

Table 3-2 MapLayersConfig parameters

ParameterMandatoryDefault valueDescription
SuffixUrlYes/map/oprThe URL suffix used by the server after http://serverName:port/ declaration.
MemoryCacheSizeYes512The total size (in MB) of cache memory dedicated to the server. If actual cached data exceeds the customized value, the oldest used items will be removed from the cache. A value of 0 disables the memory cache.
DiskCacheSizeYes2048The total size (in MB) of disk cache memory dedicated to the server, used to extend the cache size. A value of 0 disables the disk cache.
DiskCacheFolderYesNAPath to the disk cache root folder. A subfolder is created for each layer within this root folder, where its disk cache will reside.
IntermediateFilesFolderYesNAPath to a folder used for temporary files and raw vector styling data.
GpuUsageInSpatialQueriesNoNADefines if the spatial queries involve the Graphic Processor Unit (GPU) to enhance performance. true enables GPU processing, false disables it.
SSLUsageNANAFor future use.
SSLInfoNANAFor future use.
ImportScansIntervalNo60Interval (in seconds) between periodic scans of the ExternalLayers folder for updates. (e.g., a package copied by administrator into an ExternalLayers subfolder).
IsClientVerPre_7_11_4YesfalseSet this flag to true if the client software MapCore™ API version is earlier than 7.11.4 to allow the GetCapabilities API to return older 3D Models and Vector 3D Extrusion map type (NATIVESTATICOBJECTS and RAW_STATIC OBJECTS).
TilingSchemePolicyNoBlock of information defining the policy of handling tiling schemes in RAW formats. Refer to TilingSchemePolicy Parameters below for detailed information.
DefaultMaxScale FactorYes1Factor used to convert screen meter per pixel scale to printed map.
DefaultTextIndexFilePathNANAFor future use
SecurityRecordFileNameNANAFor future use

TilingSchemePolicy Parameters​

TilingSchemePolicy parameters are described below.

Figure 3-2

Figure 3-2 TilingSchemePolicy scheme

Where:

Table 3-3 TilingSchemePolicy parameters

ParameterMandatoryDefault valueDescription
DefaultTilingScheme Link to GUI chapter: ž Server configuration parameters: Default Tiling Scheme ž Tiling scheme parameters: Default Tiling SchemeYesMAPCORETiling scheme applied to every raw image added to the server or imported without a tiling scheme. Refer to Tiling Scheme for detailed information on possible values and their relationship to the layer’s coordinate system.
TilingSchemesByCRSNoNAArray of exceptions to the default tiling schemes. Instances are used to set a different default tiling scheme per target or coordinate system (CRS). Refer to Tiling Scheme for use case scenarios. See parameters in Table 3-4 TilingSchemeByCRS parameters below. Refer to Coordinate System for details on coordinate system.

Table 3-4 TilingSchemeByCRS parameters

ParametersMandatoryDefault valueDescription
CoordinateSystemNoNAThe coordinate system for which an independent tiling scheme is defined. Possible values are ESPG codes. See Table 3-5 CoordinateSystem parameters below. Refer to Tiling Scheme for use case scenarios. Refer to Coordinate System for details on coordinate system.
TilingSchemeYesNAThe tiling scheme used by default in the specified coordinate system. Refer to Tiling Scheme for detailed information on possible values.

Table 3-5 CoordinateSystem parameters

| --- | --- | --- | --- | | Parameters | Mandatory | Default value | Description | | Note that the identical structure applies to CoordinateSystem, SourceCoordinateSystem, and TargetCoordinateSystem | | | | | SRIDType | Yes | NA | Spatial Reference ID (SRID) type. Possible values: EPSG: EPSG codes repository. If this value is selected then Code is mandatory. | | Code | No | NA | This parameter contains the EPSG code of the coordinate system. | | Proj4String | No | NA | Not in use. |

User-specific Layer Parameters​

The layer configuration file McLayersDataConfig.xml holds information of an array of layers, each stored in a MapLayerConfig element. Its parameters are described below.

Refer to System Folders and Configuration Files for further information on this file and its location.

Figure 3-3

Figure 3-3 MapLayerConfig scheme

Where:

Table 3-6 MapLayerConfig parameters

ParameterMandatoryDescription
LayerId Link to GUI chapter: ž Native layer Layer ID ž Raw raster layer Layer ID ž Raw DTM (Elevation) layer Layer ID ž Raw vector layer Layer ID ž Raw S-57 layer Layer ID ž Raw 3D Model layer Layer ID ž Raw 3D Vector Extrusion layer Layer IDYesA unique, case-sensitive string that identifies the layer and used by MapCore™ client. May contain letters (including non-English letters), numbers, dash, and underscore.
Title Link to GUI chapter: ž Native layer Title ž Raw raster layer Title ž Raw DTM (Elevation) layer Title ž Raw vector layer Title ž Raw S-57 layer Title ž Raw 3D Model layer Title ž Raw 3D Vector Extrusion layer TitleYesString that may be used by the client application as the layer’s name. The title may contain any character, including non-English characters.
LayerTypeYesPossible values: NATIVE_RASTER NATIVE_DTM NATIVE_VECTOR NATIVE_VECTOR_3D_EXTRUSION NATIVE_TRAVERSABILITY NATIVE_MATERIAL RAW_RASTER RAW_DTM RAW_VECTOR RAW_3D_MODEL RAW_VECTOR_3D_EXTRUSION RAW_MATERIAL RAW_TRAVERSABILITY Refer to Layer and Layer source materials for detailed information on layers. If a native layer is specified, the parameter NativeLayerPath (see below) must also be specified. Note that the specification of native layer type is mandatory for the purpose of silent import (see Silent import). If a raw layer is specified, the parameter RawLayerInfo (see below) must also be specified.
LayerUUIDNAInternal server parameter used to control layer version. A new UUID is assigned whenever the layer is updated. The old layer version is stored in cache until the last client using it closes the layer.
Group Link to GUI chapter: ž Native layer Group Name ž Raw Raster Group Name ž Raw DTM (Elevation) layer Group Name ž Raw vector layer Group Name ž Raw S-57 layer Group Name ž Raw 3D Model layer Group Name ž Raw 3D Vector Extrusion layer Group NameNoArray of group name(s) associated with this layer. Group name may contain any character, including non-English characters.
DrawPriority Link to GUI chapter: ž Native layer Draw Priority ž Raw Raster Draw Priority ž Raw DTM (Elevation) layer Draw Priority ž Raw vector layer Draw Priority ž Raw S-57 layer Draw PriorityNoAn integer between -128 and 127 specifying the drawing order of layers displayed in a single viewing canvas (i.e., Viewport). When not specified, the value 0 is used. A layer with higher priority is rendered above a layer with a lower one. Regardless of priority, all vector layers are always rendered above all raster layers.
NativeLayerPathNoMandatory for native layers only, contains the path to the mapping materials of the native layer.
NumLayersToIgnoreNoFor Raster and DTM layers as well as 3D models, a way to reduce scale by specifying the number of pyramid levels to ignore if the map is too detailed.
EnhancedBorderOverlap Link to GUI chapter: Enhance Border OverlapNoSet to true to show layer overlap contiguous (border is not displayed).
ExtrusionHeightMaxAdditionNoLimit maximal height (meters) for object extrusion. This may be useful when the client application artificially inflates building or mast heights.
RawLayerInfoNoMandatory for raw layers only. This block of parameters contains information about raw layer. See RawLayerInfo Parameters below.
ClientMetadataNoAn optional block of parameters to store client metadata, if exists. See ClientMetadataParameters below.

RawLayerInfo Parameters​

RawLayerInfo parameters are described below. To avoid redundancy, parameters that are used in several layers are described only once, where they first appear. All other instances point to that first appearance. To facilitate navigation, for every parameter that is included in the MapCore™ Map Layer Server GUI, references are added to the GUI form field(s) that are further described in The web GUI.

Figure 3-4

Figure 3-4 RawLayerInfo scheme

Where:

Table 3-7 RawLayerInfo parameters

ParameterMandatoryDescription
TilingSchemeNoRefer to TilingScheme configuration parameter in Table 3-4 TilingSchemeByCRS parameters. Ignored for raw 3D model layers (Model3D), which are served as is.
TargetCoordinateSystemNoRefer to Coordinate System for details on source and target coordinate system. Ignored for raw 3D model layers (Model3D), which are served as is. Refer to Table 3-5 CoordinateSystem parameters for details on the structure of this parameter.
RasterYes, for this layer type onlyFor raw raster layer only, a block of information about this type of layer. See Raster Parameters below for detailed information about included parameters.
DtmYes, for this layer type onlyFor DTM layer only, a block of information about this type of layer. See DTM Parameters below for detailed information about included parameters.
VectorYes, for this layer type onlyFor vector layer only, a block of information about this type of layer. See Section 0
Model3DYes, for this layer type onlyFor 3D model only, a block of information about this type of layer. See Model3D Parameters below for detailed information about included parameters.
Vector3DExtYes, for this layer type onlyFor Vector 3D Extrusion layers only, a block of information about this type of layer. See Vector3DExtrusion Parameters below for detailed information about included parameters.
MaterialYes, for this layer type onlyFor raw material layer (RAW_MATERIAL) only, a block of information about this type of layer. See Material and Traversability Parameters below.
TraversabilityYes, for this layer type onlyFor raw traversability layer (RAW_TRAVERSABILITY) only, a block of information about this type of layer. See Material and Traversability Parameters below.

Raster Parameters​

Raster type parameters are described below.

Figure 3-5

Figure 3-5 Raster type scheme

Where:

Table 3-8 Raster type parameters

ParameterMandatoryDescription
BaseLocationFolderNoPath to base folder of the data.
LocationYesBlock of information containing references to the set of data sources that comprises the raster data. See Location Parameters below.
IsImageCoordSys Link to GUI chapter Image Coordinate SystemNoUsed to define whether image is not georeferenced. Set true for non-orthographic images (in which case the parameter TargetCoordinateSystem is not relevant and therefore not mandatory). Default value is false.
MaxWorldLimitNoBlock of information defining a rectangle cropping area for a map clip. The resulting layer will include only the area inside this rectangle. See MaxWorldLimit and ClipRect Parameters below for details on included parameters.
MaxScale Link to GUI chapter: ž Raw raster layer Max Scale (m/pixel) ž DTM (Elevation) layer Max Scale (m/pixelNoLayer's typical maximal scale in float format for source data without built-in pyramid of levels-of-detail. Best performance is achieved in camera scales equal to or lower than specified value. NOTE: This parameter differs from the MaxScale parameter contained in the Vector layer information.
ResolveOverlapConflictsNoDetermines how conflicts are resolved for each pixel in overlapping areas. Set to true to ignore transparent pixels (affects performance). Set to false to enforce transparent pixels (pixels from other source files may not be displayed).
EnhanceBorderOverlapNoDetermines whether to enhance the quality of layer border and prevent black border lines to display in case of overlapping layers. Set to true to prevent border display (affects performance).
FillEmptyTilesByLowerResolutionTiles Link to GUI chapter: Fill Empty Tiles by Lower Resolution TilesNoUse only when the highest resolution varies within a single levels-of-detail-based layer. Set totrue to fill empty tiles with data from lower-resolution tiles.
IgnoreRasterPaletteNoSet to true to ignore the raster palette and display palette as grayscale.
HighestResolutionNoHighest (finest) resolution in map units per pixel (in raster layers) or per DTM point (in DTM layers) to be used instead of that specified by the components. Default value is 0 )that is, use source data information).
TransparentColorNoBlock of information used to change color (in RGB format) of colored pixels to transparent pixels. Refer to TransparentColor Parameters for details on included parameters.
Location Parameters​

Location parameters are described below.

Figure 3-6

Figure 3-6 Location scheme

Where:

Table 3-9 Location parameters

ParameterMandatoryDescription
LocationTypeYesType of data location. Might be one of the following: FILE - The location is a single file. FOLDER - The location is a folder containing multiple files.
PathYesPath to FILE or FOLDER specified in LocationType parameter above. A relative path is defined relative to server data repository folder by default (see System Folders and Configuration Files), or relative to BaseLocationFolder parameter, if defined (see Table 3-8 Raster type parameters above).
ClipRectNoThe Layer's clipping (cropping) bounding box used to limit the footprint of the displayed layer. It is recommended to use MaxWorldLimit parameter in Table 3-8 Raster type parameters if the same clipping is required for all layers in group. See MaxWorldLimit and ClipRect Parameters below.
MaxWorldLimit and ClipRect Parameters​

MaxWorldLimit and ClipRect blocks have the same parameters. It is recommended to use the ClipRect block only if different crop size is required for different layers in the group. MaxWorldLimit and ClipRect parameters are described below.

Figure 3-7

Figure 3-7

Figure 3-7 MaxWorldLimit and ClipRect schemes

Where:

Table 3-10 MaxWorldLimit and ClipRect parameters

ParameterMandatoryDescription
MinVertexYesBottom left corner of the clipping bounding box defined by x and y (see below).
MaxVertexYesTop right corner of the clipping bounding box defined by x and y (see below).

x and y in each of the parameters above are coordinates in MapCore's format. If the metric coordinate system (see Coordinate System) is used, it is the x and y (map unit equals 1 meter). If the geographical coordinate system is used, x and y are longitude and latitude respectively, both multiplied by 100000 (map unit equals 1 divided by 100000).

TransparentColor Parameters​

TransparentColor parameters are described below.

Figure 3-8

Figure 3-8 TransparentColor scheme

Where:

Table 3-11 TransparentColor parameters

ParameterMandatoryDescription
RedNoValue of red in RGB byte color format (value 0 through 255).
GreenNoValue of green in RGB byte color format (value 0 through 255).
BlueNoValue of blue in RGB byte color format (value 0 through 255).
TransparentColorPrecisionNoUse in cases of raster data overlap. Specifies the degree of pixel precision (integer) for RGB value to be set as transparent. When specified, Red, Green, and Blue parameters are mandatory.

DTM Parameters​

DTM type parameters are described below.

Figure 3-9

Figure 3-9 DTM type scheme

Where:

Table 3-12 DTM type parameters

ParameterMandatoryDescription
BaseLocationFolderNoSee EnhanceBorderOverlap
LocationYesSee Location
MaxWorldLimitNoSee MaxWorldLimit
MaxScaleNoSee MaxScale
HighestResolutionNoSee HighestResolution

Vector and S-57 Parameters​

Vector type parameters are described below.

Note that the same parameters are used for the S-57 layer type with the stipulation that the value of the StylingFormat parameter be S52. Refer to Styling Format for further details on the S52 styling format.

Figure 3-10

Figure 3-10 Vector type scheme

Where:

Table 3-13 Vector type parameters

ParameterMandatoryDescription
DataSource Link to GUI chapter: ž Raw vector layer Data Source ž Raw 3D Vector Extrusion layer Data SourceYesPath for the vector information data source. May be the path to: · A single data source (this is the only option for GUI client) · A folder (this is the only option for GUI client). · Internal layer within a vector data (e.g., MyLayer/MyFile.kmz*Polygon@Lakes describes a layer named Lakes with polygons geometry within the file MyLayer.kmz). For vector layers only (not 3D vector extrusion layers): · If the data source contains more than one layer, each layer separately. · If MapCore styling XML is used, specify the relevant .xml file; otherwise, default styling is applied to the data.
StylingFormatNoDetermines how to render the layer. Specify the value S52 for an S-57 layer type. Refer to Styling Format for detailed information and possible values.
SourceCoordinateSystemNoCoordinate system supplied in this field is used to override information embedded in the layer's data or supply information if none exists in the layer’s data. Refer to Coordinate System for detailed information on source and target coordinate systems. Refer to Table 3-5 CoordinateSystem parameters for details the structure of this parameter and included attributes.
ClipRectNoRefer to the ClipRect parameter under Table 3-9 Location parameters for a detailed description. Refer to MaxWorldLimit and ClipRect Parameters for detailed information about included parameters.
MinScaleNoSpecify value to limit minimum scale for layer display. If omitted, the value 0 is used.
MaxScaleNoSpecify value to limit maximum scale. If omitted, the value ∞ is used. NOTE: This parameter differs from the MaxScale parameter contained in the Raster and DTM layer information.
MaxScaleFactorNoMaximal scale factor used in client applications to multiply the max scale when displaying this layer.
Locale Link to GUI chapter: ž Raw vector layer Locale (Language) ž Raw S-57 layer Locale (Language)NoThe 2-letter language code that describes the language of text in the layer. If omitted, language is derived from the locale ID string found in the host computer’s settings. Language codes can be found at https://www.science.co.il/language/Locale-codes.php
PointTextureFileNoIf MapCore XML styling is not provided, specify path to a customized image file with which to replace the default point icon.
VersionCompatibility Link to GUI chapter: ž Raw vector layer Version compatibility ž Raw S-57 layer Version compatibilityNoSpecify when the client application uses a MapCore™ API (SDK) version that is older than the current server API version to allow for backward compatibilitywhen converting vector layers into NATIVE_VECTOR layers. To find the MapCore™ API version, refer to SDK documentation found in the file MapCore7.chm under the section IMcOverlayManager::ESavingVersionCompatibility, for example: If MapCore™ API version is current, the default value LATEST is used.
MaxVerticesPerTile Link to GUI chapter: ž Raw vector layer Max Vertices per Tile ž Raw S-57 layer Max Vertices per TileNoMaximal number of vector object vertices assigned to tile. Allows to avoid graphic system overload when displaying at a small scale a layer that has many objects. Higher numbers improve performance and memory consumption in zoom-in; smaller numbers improve performance in zoom-out. When omitted, the value 100000 is used.
MaxVisiblePointsPerTile Link to GUI chapter: Raw vector layer Max Visible Points per Tile Raw S-57 layer Max Visible Points per TileNoMaximal number of visible vector point objects per tile; objects exceeding this threshold are not displayed. Allows to avoid graphic system overload when a layer with many points is zoomed out. When omitted, the value5000 is used. The actual number of visible objects depends on camera scale so that the threshold filters out less information when zooming in.
MinSizeForObjVisability Link to GUI chapter: ž Raw vector layer Min Size for Object Visibility ž Raw S-57 layer Min Size for Object VisibilityNoMinimal threshold (in pixels) for displaying vector lines and polygons; objects smaller than the threshold are not displayed. Allows to avoid graphic system overload when a layer with many lines and polygons is zoomed out. When omitted, the value8 is used. The actual number of visible objects depends on camera scale so that the threshold filters out less information when zooming in.
OptimizationMinScale Link to GUI chapter: ž Raw vector layer Optimization Min Scale ž Raw S-57 layer Optimization Min ScaleNoMinimal map scale for the implementation of MaxVerticesPerTile, MaxVisiblePointsPerTile, MinSizeForObjVisability parameters described above. When omitted, the value 0 is used and optimization is performed at all scales.

Model3D Parameters​

Model3D parameters are described below.

Figure 3-11

Figure 3-11 Model3D type scheme

Where:

Table 3-14 Model3D type parameters

| --- | --- | --- | | Parameter | Mandatory | Description | | DataSourceDirectory | Yes | Path to the folder containing 3D model data: · If 3D Tiles format is used, specify path to the directory that contains the main JSON file. · Alternatively, specify the path to a 3TZ archive file (*.3tz) holding the 3D Tiles data. · The main JSON file is tileset_explicit.json if present, otherwise tileset.json, otherwise the only JSON file of the data source. The OpenSceneGraph (OSG) format is no longer supported. | | RelativeUrl | No | Set by the server: the URL path under which the model’s main JSON file is served to client applications. Raw 3D models are not indexed; they are served as is (static content) out of their data source. Do not set this parameter manually. | | TargetHighestResolution | No | Ignored; the model is served as is. | | ClipRect | No | Refer to the ClipRect parameter under Table 3-9 Location parameters for a detailed description. Refer to MaxWorldLimit and ClipRect Parameters for detailed information about included parameters. | | OrthometricHeights | No | Ignored; the model is served as is, and the client application handles its heights. |

Vector3DExtrusion Parameters​

Vector3DExtrusion type parameters are described below.

Figure 3-12

Figure 3-12 Vector3DExtrusion type scheme

Where:

Table 3-15 Vector3DExtrusion type parameter

| --- | --- | --- | | Parameter | Mandatory | Description | | DataSource | Yes | See DataSource parameter in Table 3-13 Vector type parameters. | | DtmLayerId Link to GUI chapter:DTM Layer ID | Yes | Name of the DTM layer in which terrain heights are provided. The DTM layer must point to the same tiling scheme and coordinate system as the vector 3D extrusion layer. | | ExtrusionHeightMaxAddition | No | See ExtrusionHeightMaxAddition parameter in Table 3-6 MapLayerConfig parameters. | | SourceCoordinateSystem | No | Coordinate system supplied in this field is used to override information embedded in the layer's data or supply information if none exists in the layer’s data. Refer to Coordinate System for detailed information on source and target coordinate systems. Refer to Table 3-5 CoordinateSystem parameters for details the structure of this parameter and included attributes. | | SideDefaultTexture | No | Block of parameters defining a default image file used to display building wall textures. Refer to Texture Parameters below for detailed information about included parameters. | | RoofDefaultTexture | No | Block of parameters defining a default image file used to display building roof textures. Refer to Texture Parameters below for detailed information about included parameters. | | SpecialTextures | No | Array of parameters defining image files to display specific buildings. See Texture Parameters below for detailed information about included parameters. | | HeightColumn | No | Name of database column in which building height-above-ground is provided. When unspecified, it is assumed that building height-above-sea is provided in building points; the height is displayed based on the highest z-value of the building’s polygon. | | ObjectIDColumn | No | Name of database column in which object ID is found instead of vector item ID. | | SideSpecialTextureIndexColumn | No | Name of database column in which indexes are found for the SideDefaultTexture parameter defined above. | | RoofSpecialTextureIndexColumn | No | Name of database column in which indexes are found for the RoofDefaultTexture parameter defined above. | | ClipRect | No | Refer to the ClipRect parameter under Table 3-9 Location parameters for a detailed description. Refer to MaxWorldLimit and ClipRect Parameters for detailed information about included parameters. | | UseSpatialIndexing | No | Set to true (default) to use spatial indexing (and create if necessary). Recommended for use with data source without built-in spatial indexing. | | IndexingFolder | No | Path to user-specified folder containing the spatial index (replaces the default folder which is located under the DataSource folder - See DataSource parameter in Table 3-13 Vector type parameters). Will only be used if the UseSpatialIndexing parameter (see above) is set to true. |

Texture Parameters​

Texture type parameters are described below.

Figure 3-13

Figure 3-13 Texture parameters scheme

Where:

Table 3-16 Texture parameters

ParameterMandatoryDescription
TextureFileYesPath to image file used to display texture.
ScaleYesScale in meters of x and y axes of the texture.
PlacementFlagsYesDetermines how texture image are placed over the object along x and y axes during rendering: NONE: Positions the image over the object’s face starting from origins. REPEAT_EDGE_PIXELS: Repeats the image edge pixels to cover the object’s face if it is larger than the texture image. REPEAT_EACH_FACE: Repeats the entire image to cover the object’s face if it is larger than the texture image. ALIGN_CENTER: Aligns the center of the texture image with the center of the object’s face. REVERSE_ALIGNMENT: Reverses x and y axes so that the x axis is read from right to left and the y axis is read from top to bottom. FIT: Fits the texture image to the object’s face.

Material and Traversability Parameters​

The Material block (layer type RAW_MATERIAL) and the Traversability block (layer type RAW_TRAVERSABILITY) describe raw code-map layers: raster data whose pixel values are codes – material IDs, or the number of traversable directions, respectively – rather than colors. Their tiles are always delivered losslessly so that the codes are preserved. The block must match the layer type; otherwise the layer is not loaded.

Both blocks have the same parameters, which are identical to the Raster type parameters (see Raster Parameters) except that IgnoreRasterPalette and TransparentColor are not supported:

  • BaseLocationFolder

  • Location (mandatory)

  • IsImageCoordSys

  • MaxWorldLimit

  • MaxScale

  • ResolveOverlapConflicts

  • EnhanceBorderOverlap

  • FillEmptyTilesByLowerResolutionTiles

  • HighestResolution

ClientMetadataParameters​

ClientMetadata parameters are described below.

Figure 3-14

Figure 3-14 ClientMetadata scheme

Where:

Table 3-17 ClientMetadata parameters

ParameterMandatoryDescription
AnyNoAny pair(s) of KeyName and KeyValue. These may be added to a layer via silent import of the MapLayerConfig file. Refer to Silent import for further details.

Verified against MapCore 12.5.0